กลุ่มเด็กพิเศษ | การเชื่อมต่อที่เชื่อถือได้

SOCAR Tower, Azerbaijan

SOCAR Tower, Azerbaijan

โซคาร์ทาวเวอร์ is an office tower located on the way to the city center of Baku, the capital of Azerbaijan. It is the tallest building in Azerbaijan and the entire Caucasus region. The building serves as the headquarters of the State Oil Company of Azerbaijan Republic (SOCAR).

The tower features 42 floors and reaches a height of 202 meters. Completed in 2016, it is now one of the most recognizable landmarks in Baku.

For this project, Dextra was involved in the concrete works between 2011 and 2014, supplying the บาร์เทค rebar coupler solution for all rebar connections. The project was supported by บาร์เทค bar-end preparation equipment sets, installed directly on-site and maintained by Dextra’s European after-sales team.

Dextra rebar couplers were supplied to contractor Tekfen for:

  • Vertical bar-to-bar connections in columns.
  • Horizontal rebar connections in slabs.
  • Wall-to-beam connections, where the coupler was cast flush with the formwork in the first phase of concreting. After formwork removal, the connecting rebar was simply screwed into the Bartec coupler.

To enable splicing at locations where rebar had not been prepared with a thread, ซ่อมGrip sleeves and hydraulic equipment were also supplied for precise applications. ซ่อมGrip allows for the convenient splicing of rebar where the protruding length is insufficient for a safe overlap.

For more information about the availability of precast solutions in the Middle East, please contact our สำนักงานดูไบ.

โซลูชั่นที่เกี่ยวข้อง

ความเชี่ยวชาญ

ในทุกช่วงเวลาของการเดินทางของลูกค้า ทีมงาน Dextra อุทิศตนเพื่อการผลิตโซลูชันการก่อสร้างอัจฉริยะที่ช่วยให้ลูกค้าของเราเข้าถึงระดับการผลิตและความปลอดภัยที่สูงขึ้นในสถานที่ก่อสร้างของพวกเขา

Dextra ถือหุ้นทางกายภาพในหลายทวีป พร้อมด้วยสินค้าคงคลังในท้องถิ่นของผู้จัดจำหน่ายของเราเสริมในแต่ละประเทศ ด้วยเครือข่ายที่ขยายออกไปนี้ Dextra ทำให้แน่ใจว่าผลิตภัณฑ์ของเราจะเข้าถึงได้เสมอไม่ว่าพันธมิตรของเราจะอยู่ที่ใดก็ตาม

สำหรับโซลูชันที่ต้องปรับแต่ง Dextra ยังสามารถดำเนินการเกินเวลาจัดส่งมาตรฐานของเราและเสนอแผนการจัดส่งแบบเร่งด่วนได้อีกด้วย ปรึกษาเราสำหรับข้อมูลเพิ่มเติม

จากแหล่งอุตสาหกรรมหลัก 3 แห่งที่ตั้งอยู่ในกรุงเทพฯ (ประเทศไทย) กวางโจว (จีน) และปูเน่ (อินเดีย) Dextra เป็นเจ้าของสิ่งอำนวยความสะดวกและกระบวนการผลิตโดยสมบูรณ์ สิ่งนี้ช่วยให้เราสามารถควบคุมระยะเวลาในการดำเนินงานและคุณภาพของโซลูชั่นที่ผลิตได้อย่างสมบูรณ์

ห้องปฏิบัติการทดสอบวัสดุที่ได้รับการรับรองอย่างอิสระ ซึ่งได้รับการรับรองมาตรฐาน ISO-IEC17025 ตั้งอยู่ที่โรงงานหลักของ Dextra ในกรุงเทพฯ เพื่อให้สามารถทดสอบวัสดุและผลิตภัณฑ์ได้

Dextra มุ่งหวังที่จะจัดหาผลิตภัณฑ์ที่ได้รับการรับรองทางเทคนิคระดับสากลที่มีความต้องการมากที่สุด และเป็นเป้าหมายของเราในการสร้างความพึงพอใจสูงสุดของลูกค้าโดยปฏิบัติตามความต้องการของลูกค้าและข้อกำหนดที่ระบุ