ICONSIAM, located on the right bank of the Chao Phraya River in western Bangkok, is a multipurpose commercial and residential complex consisting of two high-rise buildings and a shopping mall. This massive development aims to restore the glamour of the Chao Phraya River’s waterfront.

The two towers are expected to reach heights of 280 meters (SuperLux Tower) and 315 meters (Magnolia Tower), respectively. Upon completion, Magnolia Tower will surpass King Power Mahanakhon Tower, which has been Thailand’s tallest building since 2015.

Dextra is supplying Thai-Obayashi (the contractor for the shopping mall structure) and Italian-Thai (the contractor for both towers) with its Бартек арматура решение для сращивания.

To ensure maximum efficiency in thread production, Dextra engineers have conducted operator training and provided on-site preventive maintenance.

In total, more than 800,000 Бартек rebar couplers and 20,000 Бары во главе are being used in the foundations and superstructure for the following applications:

L-shaped дюбель стержни (соединения стена-плита)

This is a typical application used in foundation мембранные стены (D-Walls) to avoid protruding rebar. It is also used in the superstructure, allowing the sliding formwork to climb without obstruction.

Замена крючковые стержни с Бары во главе

Когда стена подкрепление особенно перегружен, использование Бары во главе (also called end anchors) allows for anchoring the подкрепление in the wall without the need for hooks.

Двустороннее соединение в стенках жесткости

Такое решение позволяет создать непрерывность внутри колонны или стены путем соединения двух горизонтальных плит или балок.

Сварные муфты для композитный структуры

Sometimes, it is necessary to start подкрепление from the steel structure. In such cases, weldable couplers are the ideal solution. Made of low-carbon steel, they can be easily welded and allow connection to a threaded rebar.

Landmark 81 is a high-rise tower project located on the banks of the Saigon River in Ho Chi Minh City. The project is owned by the Vietnamese company Vingroup.

Construction of the tower began at the end of 2014, and it reaches a height of 470 meters to tip, setting a new height record in Vietnam. Landmark 81 is the 17th tallest tower in the world.

Для этого проекта Dextra поставляет свою известную Бартек solution to the contractor Coteccons. The Бартек solution has been approved by ARUP, the owner’s representative consultant, and MACE International, the structural consultant.

In total, 250,000 Бартек couplers will be used for vertical rebar connections in the core wall and columns, as well as for horizontal applications such as core wall-to-beam and core wall-to-slab connections.

The use of rebar couplers allows the climbing formwork to progress unencumbered, while also enabling efficient connection of slab starter bars. These technologies, combined with state-of-the-art concrete monitoring, facilitate extremely fast construction cycles—as short as 35 hours per floor.

For composite applications (steel columns to beams), Dextra has also supplied 20,000 weldable couplers.

Пример привариваемой муфты Bartec на балке

The fast-paced construction site is supported by three sets of Dextra Бартек bar-end preparation equipment, installed directly on site. The equipment is maintained by Dextra and operated by Dextra’s distributor in Vietnam, Lotus Greentech.

ONE Лимассол Тауэр коммерческое здание и новая достопримечательность Лимассола, Кипр. Цель проекта — позиционировать остров на международном рынке элитной недвижимости, повышая его привлекательность для иностранных инвестиций, предлагая резиденции, удобства и услуги мирового класса. Это также подстегнет экономику Кипра и увеличит возможности трудоустройства на местном уровне.

ONE Limassol Tower высотой 170 метров и 33 этажа — это самый высокий жилой проект на берегу моря в Европе. В здании будет 83 роскошных апартамента, включая трехэтажный пентхаус.

Для укрепления этого знакового здания компания Dextra предоставила свой арматурные муфты и комплекты машин для подготовки концов прутков подрядчику J&P и ACC JV, совместному предприятию Joannou & Paraskevaides Group (J&P) и Arabian Construction Company (ACC).

Больше, чем 60,000 Бартек муфты использовались для соединения арматурных стержней в стропилах и вертикальных конструктивных элементах здания.

The new headquarters building of the National Bank of Kuwait is a 300m-tall tower with a total floor area of 127,000m². Its design, inspired by pearl shells, is located in the heart of Kuwait City’s financial district.

The main structure consists of композитный concrete and steel, while the cladding on the fins and façades is predominantly glass-reinforced concrete.

Dextra contributed to reinforcing the building’s concrete structure by providing the following solutions:

• 100,000 Бартек муфты were installed for column подкрепление, construction суставы in the raft, and slab/beam-to-core wall connections.
• 35,000 стержни с головкой acted as shear studs in the raft.
• 1,500 Юнитек болтовые соединения were used to extend existing reinforcing bars that were either unthreaded or too short for lapping. This convenient solution allows for rebar connections using a simple pneumatic wrench on-site, eliminating the need for rebar preparation.

Акт первый | Акт второй Башня is a premium residential project in the Opera District of Downtown Dubai.

The development consists of two towers: Act One (52 stories) and Act Two (46 stories).

With their prime location, these residential towers offer stunning views of the Dubai Fountain and the Burj Khalifa. They are just a few minutes away from the Dubai Metro and major attractions such as the Dubai Mall and Souk Al Bahar.

For this exceptional residential project, Dextra was entrusted with reinforcing the buildings’ structures, including raft foundations, columns, slabs, and construction суставы.

A total of 150,000 Бартек rebar couplers, along with rebar preparation machines, were supplied to the construction site.

Бартек rebar couplers accelerate construction by providing a faster and more efficient way of connecting rebars compared to the traditional lapping method.

The thread on the rebar can be extended from a half-coupler to a full-coupler length, allowing the connection to be completed without rotating the bar.

Big Box Retail is a new four-story retail center designed to have the smallest possible carbon footprint, featuring an innovative optimization of the air-conditioning load.

Located in Jebel Ali, Dubai, UAE, the center spans 81,000 square meters and offers a leasable area for over 100 retail and concept stores.

Декстра's Гроутек couplers, integrated into the precast panels, made on-site assembly quick and efficient. More than 1,100 units of Гроутек Л in 25mm and 32mm sizes were supplied.

Гроутек is a high-performance precast connection solution that is easy to set up and fast to install on-site using grout injection. It supports the connection of precast concrete columns, panels, and beams.

The first phase of the retail center is set for completion in 2019, while the second phase will introduce a residential area, creating a new lifestyle hub in Dubai.

Galaxy Towers, developed by Aurobindo, is a project to construct a 24-story precast office building in Hyderabad, India.

It will be the tallest office tower in India built using precast technology.

The building consists of four basement floors и 24 upper stories, with 1.9 million sq. ft. of leasable area, which will include health clubs, food courts, cafés, a business center, ample parking, and a waiting lounge.

The project is expected to be completed in half the time of a comparable conventional cast-in-situ construction, demonstrating how precast technology has gained popularity due to its efficiency.

For this landmark project, Dextra supplied a critical component of the precast structure: Гроутек муфты, half-grouted sleeves designed for the connection of precast elements. These couplers are manufactured in compliance with Eurocode 2, BS 8110, ACI 318, IBC, AASHTO, and IS 16172.

By installing Гроутек муфты into the precast columns and walls at the precast factory, fast and secure connections of walls and columns are achieved by injecting cementitious non-shrink grout into the sleeves on-site. A total of 102,000 Гроутек муфты have been supplied for this project.

Image credit: Aurobindo Realty & Infrastructure Private Limited at https://bit.ly/37DW7IT