Декстра Групп | Надежные соединения

DEXTRA
Поиск
Закройте это окно поиска.
Моя Декстра
Поиск
Закройте это окно поиска.

Dextra’s GFRP solutions on Australian projects – the Melbourne Metro case

Melbourne Metro

The Melbourne Metro Tunnel will connect the Sunbury line with the Pakenham and Cranbourne lines

Call our Authorized Agent in Australia, RHE24: +61 424 204 366

Glass Fiber Reinforced Polymer (GFRP) solutions are frequently used for several applications in civil engineering due to its many benefits compared to alternative, conventional materials:

light weight

A 1/4 of the weight, but 2x stronger in tension compared to steel rebar
corrosion-free

For corrosive resistance in acidic and alkali environments
cutability

Ideal for temporary applications
100 years of lifetime

Suitable for permanent applications

In mining and tunneling this composite technology has successfully been used for decades, and GFRP is now also available for soil nails and tieback ground anchors.

A perfect showcase of latest GFRP solutions available is the Melbourne Metro Tunnel project, a major enhancement to Melbourne’s rail network: a multibillion-dollar project comprising the design and construction of twin nine-kilometer tunnels and five underground stations.

Dextra supported the project team with its technical expertise on GFRP at design stage and manufactured the GFRP solutions as per the project’s requirements:

combination bolt

ASTEC GFRP Combination Bolts were used as temporary measure to secure the center walls of the 19m wide caverns of the two major CBD stations during construction of two conventional 7m tunnels, built in parallel. Easy removal after completion enabled faster construction progress.

soil nail

GFRP Astec soil nails secure the stations walls under construction. Some of the anchors are located outside the boundary of the project and can remain in the ground as material properties allow for easy cutting at later stage via commonly used excavation equipment.

soft-eyes

GFRP ASTEC Soft-Eyes enabled disruption-free penetration of the Tunnel Boring Machines (TBM) through the thick concrete diaphragm walls of five stations. No demolition equipment needed, and no workers required to access the shaft to guarantee the maximum level of safety and efficiency.

To learn more about Dextra GFRP solutions in Australia please:

  • Contact our Dextra Sales Representative: This email address is being protected from spambots. You need JavaScript enabled to view it.
  • Or call our Authorized Agent in Australia, RHE24: +61 424 204 366
  • Headed Bar calculation tool (ACI 318) released

    Dextra Headed Bar Calculation Tool ACI 318

    We are pleased to announce the release of the Headed Bar Calculation Tool as per ACI 318, available for:

  • Bartec – ACI 318 (imperial/US)
  • Rolltec – ACI 318 (imperial/US)
  • Bartec – ACI 318M (metric/world)
  • Fortec – ACI 318M (metric/world)
  • Rolltec – ACI 318M (metric/world)
  • This document will allow designers to easily calculate the minimum edge and spacing requirements, confinement reinforcement and if necessary, rebar bond contribution for Dextra headed bars.

    Simplify your work and take advantage of Dextra tools!

    Download the calculation tool

    Dextra seminar with Bouygues-Thai

    Dextra held a seminar on building construction technology with Bouygues-Thai on Friday, September 18, 2020 at Dextra Manufacturing office and factory in Bangkok, Thailand.

    The one-day seminar featured innovative precast element connection technology, tension and compression bar systems, crosshole sonic logging testing method, a technical detailing training and a factory visit.

    Dextra-Bouygues-Thai seminar

    Read more about Dextra solutions

    WEBINAR – Challenges and Opportunities for Ports and Shipping in ASEAN

    These are extraordinary times, creating unique obstacles and unexpected opportunities for ports professionals around the world.

    Join us at this upcoming webinar event to discuss about the situation in Southeast Asia:

    CURRENT CHALLENGES AND FUTURE OPPORTUNITIES FOR PORTS AND SHIPPING IN ASEAN

    Thursday, September 24, 2020

    10.00 to 11.30AM (CEST)

    The webinar features prestigious panelists in the port and shipping industry of Indonesia, Malaysia and Philippines, along with Dextra experts in port expansion solutions.

    Register now for free

    New CAD/BIM tools for Marine Tie Bars!

    Marine Tie Bars Tools

    New CAD/BIM components of Marine Tie Bars are available for AutoCAD, Revit and Tekla.

    Dextra Marine Tie Bars are used in port and harbour construction to anchor waterfront structures. Acting as an anchorage to tie back a sea wall to an anchor wall, they can be made compatible with all sheet pile profiles, combi walls and concrete diaphragm walls.

    Эти инструменты CAD/BIM позволяют проектировщикам быстро и точно моделировать и детализировать строительные конструкции, импортируя предоставленные компоненты в выбранное программное обеспечение.

    Загрузите компоненты прямо сейчас и воспользуйтесь преимуществами наших простых в использовании компонентов для AutoCAD, Revit и Tekla, доступных во всех размерах и классах.

    Marine Tie Bars Tools

    С чего начать?

    1. Download and install Marine Tie Bars component:

        • Для пользователей AutoCAD загрузите ЗДЕСЬ (требуется регистрация)

        • Для пользователей Revit загрузите ЗДЕСЬ (требуется регистрация)

        • Для пользователей Tekla: загрузите ЗДЕСЬ (требуется регистрация)

    2. Распакуйте файл в нужную папку на вашем ноутбуке.

    3. Следуйте пошаговым инструкциям, описанным в файле «Установка».

    4. Выберите правильный размер стержня в соответствии с требованиями вашего проекта. Нарисуйте полную структуру.

    5. Со временем вы сможете добавлять примечания к спецификациям продукта непосредственно в AutoCAD, Revit и Tekla.

    Dextra Marine Tie Bars tools: tutorial videos





    Dextra to attend WTC 2020 virtual exhibition

    Dextra WTC 2020


    Click here for more information and registration

    Dextra is showcasing innovative ground engineering solutions, featuring Мягкие глаза из стеклопластика и Rock-Bolts, at the World Tunnel Digital Congress (WTC) 2020 on September 14-16, 2020.

    WTC is one of the world’s leading tunneling event that explores the latest innovations, trends and advances in all areas of tunneling, from tunnel project development to both design and construction.

    The event is moved to a fully digital platform due to the impact of COVID-19: it will include online technical paper presentations, along with training courses, and virtual exhibitions by companies from all over the world.

    Dextra features a wide range of underground temporary and permanent support solutions, with a focus on cuttable glass fiber reinforcement polymer (GFRP) technology: join us at the virtual exhibition at booth no. SS11 (Silver Sponsor)!

    Read more about Dextra solutions

    Dextra GFRP rebar technology featured in SAICE magazine

    Dextra GFRP rebar technology is featured in the April 2020 issue of the SAICE Civil Engineering magazine.

    The article provides guidance on the design of lateral support systems using FRP rebars as soil nails or ground anchors.

    Fiber-reinforced polymers are increasingly used in mining and tunneling projects as they provide high performance while being easily cuttable, corrosion-free and lighter in weight with respect to steel rebars.

    Read the full issue

    For more information on Dextra GFRP rebars

    Новые инструменты CAD/BIM для натяжных стержней!

    Tension Rod Tools

    Новые CAD/BIM-компоненты натяжных стержней доступны для AutoCAD, Revit и Tekla.

    Dextra Tension Rod — это высокоэффективное решение для крыш, фасадов, мостов и виадуков. Выступая в качестве элементов крепления или подвески, они эстетически привлекательны и при этом обладают высокой функциональностью.

    Эти инструменты CAD/BIM позволяют проектировщикам быстро и точно моделировать и детализировать строительные конструкции, импортируя предоставленные компоненты в выбранное программное обеспечение.

    Загрузите компоненты прямо сейчас и воспользуйтесь преимуществами наших простых в использовании компонентов для AutoCAD, Revit и Tekla, доступных во всех размерах и классах.

    Tension Rod Tools

    С чего начать?

    1. Загрузите и установите компонент натяжной тяги:

        • Для пользователей AutoCAD загрузите ЗДЕСЬ (требуется регистрация)

        • Для пользователей Revit загрузите ЗДЕСЬ (требуется регистрация)

        • Для пользователей Tekla: загрузите ЗДЕСЬ (требуется регистрация)

    2. Распакуйте файл в нужную папку на вашем ноутбуке.

    3. Следуйте пошаговым инструкциям, описанным в файле «readme.pdf».

    4. Выберите правильный размер стержня в соответствии с требованиями вашего проекта. Нарисуйте полную структуру.

    5. Со временем вы сможете добавлять примечания к спецификациям продукта непосредственно в AutoCAD, Revit и Tekla.

    Инструменты Dextra Tension Rod: обучающие видеоролики





    Dextra Group announces partnership with Rocscience

    Rocscience Partnership

    We are excited to announce that a wide range of Dextra ground engineering solutions is now available in the Rocscience programs Slide2, Slide3, RS2 и RS3.

    Rocscience is a world leader in developing 2D and 3D software for civil, mining, and geotechnical engineers. For over 20 years, they have built on leading-edge research to create the best geotechnical software available.

    Users will be able to select Dextra products from a built-in list and integrate them directly into their design.

    The Dextra products that are available in the Rocscience suite include:

    • ASTEC Active Anchor TB3

    • ASTEC Combination Bolt

    • ASTEC GFRP Injected Thread Rockbolt

    • ASTEC GFRP Thrust Bolt

    • ASTEC Soil Nail Grade 50

    • GEOTEC GFRP Rockbolt

    • GEOTEC GFRP Self Drilling Rockbolt

    Dextra ground engineering solutions are high performance and versatile. Due to their cuttability, the bolts can be used for the stabilization of soil-covered slopes, face bolting and other tunneling/mining works in both temporary and permanent applications.

    Learn more about Dextra soil stabilization solutions

    Learn more about Dextra tunneling and mining solutions

    Dextra China certified ISO 14001:2015

    Dextra China ISO 14001:2015

    We are delighted to share with you our ISO 14001:2015 (environmental management system) certificate awarded by the Bureau Veritas Certification.

    It is to certify that the management system of Dextra China has been audited and found to be in accordance with the requirements of the management system standards, in the scope of design, manufacturing and sales of products.

    With the update of our ISO 9001 certification in 2018, this new environmental certification completes a solid quality system in the Guangzhou office.

    Dextra has been consistent in creating a green and environmentally sustainable manufacturing system.

    We have been improving our quality management system and raising environment awareness in our daily operations.

    Contact Dextra in China

    Пожалуйста, введите вашу информацию

    Связаться с нами

       Поделитесь с нами своей информацией, и мы свяжемся с вами как можно скорее.