Рубрика: Новости

In the United Arab Emirates, Dextra recently delivered a new Oil and Gas project. Dextra tension rods have been used for the support of structure supporting very large liquid gas tanks.

For this application, Dextra engineered, manufactured and delivered bar assemblies based on Carbon Steel bars Gr.355 of diameter Ø120mm. Each натяжная планка system is composed of two segments spliced at the lower half of the assembly. The system is mounted onto gusset plates thanks to their fork ends, which can be connected to the structure in just a few minutes by simply sliding in a pin in the middle of the fork.

For length adjustment and tightening, turnbuckes, positionned at the lower half of each tendon, are simply rotated to bring bar segments closer to each other and tension the overall system.

Метро Эр-Рияда — это масштабный проект городской транспортной системы, строящийся в Эр-Рияде, Саудовская Аравия. Проект будет включать 85 станций, построенных на 6 транспортных линиях, общая длина железных дорог составит 176 км. Ожидается, что на момент открытия в 2018 году система будет обслуживать не менее 1 миллиона пассажиров ежедневно.

For this large infrastructure project, Dextra Middle East has been involved on various stations and packages.

Земляные работы

Before proceeding with general construction works, during early excavation phase, it is required to anchor retaining walls back into the stable ground in order to prevent any wall displacement. This will allow to keep excavating in a safe environment.

For that purpose, Dextra supplied steel ground anchors installed through retaining wall. Each system is based on a high-tensile fully threaded bar, coming with nut and plate, and grouted to provide bonding with the soil.

Плот и вертикальные соединения

Арматурные муфты Bartec were supplied for the works in the stations. Couplers were used for slabs, column and wall connections. A typicall application on this project is to cast rebar couplers in the concrete with reinforcement, and then proceed with second phase bar connection at a later stage.

Unitec bolted couplers can have also been use on various parts of the project. Typically Юнитек is used when overlap is planned but lapping length appear to be too short to perform a safe splice. In that case Unitec provides a convenient and full performance connection.

Dextra supplied contractor Italian-Thai with Натяжные стержни to support the roof structure of the expansion of BITEC, a leading exhibition and convention center in central Bangkok. Installation has successfully be completed in 2016!

In total, Dextra delivered 298 assemblies in various diameters, each composed of multiple bars connected with couplers and turnbuckles and anchored to the structure with fork ends, with total assembly lengths in several cases exceeding 50 meters long (average 33 meters).

Для таких крупных структур Натяжные стержни offer a number of advantages compared to other “tensioning” solutions: lower elongation under loads, lower post tensioning forces required, better resistance to corrosion, reduced long terms relaxation and reduced maintenance and surveillance costs.

For precabricated cages used in foundation piling, Dextra recommends the use of 2 distinct solutions that will speed up and ease installation on site: optimal performance, higher productivity, safer operations.

Reinforcement >> Dextra coupler solutions are designed to allow the reconnection of prefabricated cages safely and in a minimum time.

CSL (Crosshole Sonic Logging) >> For Cross-Sonic Logging tubes (used in foundations testing), Sonitec will allow fast reconnection of the tubes without welding.

Все сотрудники Dextra выражают свои глубочайшие соболезнования в связи с кончиной Его Величества короля Таиланда Пумипона Адульядета. Его Величество неустанно служил Таиланду, и его преданность народу Таиланда будут помнить. Наши мысли со всеми тайцами и всеми нашими тайскими коллегами в это трудное время.