Grupo Dextra | Conexões confiáveis

ICONSIAM, Thailand

ICONSIAM, Thailand

ICONSIAM, located on the right bank of the Chao Phraya River in western Bangkok, is a multipurpose commercial and residential complex consisting of two high-rise buildings and a shopping mall. This massive development aims to restore the glamour of the Chao Phraya River’s waterfront.

The two towers are expected to reach heights of 280 meters (SuperLux Tower) and 315 meters (Magnolia Tower), respectively. Upon completion, Magnolia Tower will surpass King Power Mahanakhon Tower, which has been Thailand’s tallest building since 2015.

Dextra is supplying Thai-Obayashi (the contractor for the shopping mall structure) and Italian-Thai (the contractor for both towers) with its Bartec vergalhões solução de emenda.

To ensure maximum efficiency in thread production, Dextra engineers have conducted operator training and provided on-site preventive maintenance.

In total, more than 800,000 Bartec rebar couplers and 20,000 Barras com cabeça are being used in the foundations and superstructure for the following applications:

L-shaped cavilha barras (conexões parede-laje)

This is a typical application used in foundation paredes de diafragma (D-Walls) to avoid protruding rebar. It is also used in the superstructure, allowing the sliding formwork to climb without obstruction.

Substituição de barras com ganchos com Barras com cabeça

Quando a parede reforço está especialmente congestionado, o uso de Barras com cabeça (also called end anchors) allows for anchoring the reforço in the wall without the need for hooks.

Conexão dupla em paredes de cisalhamento

Esta solução permite criar uma continuidade no interior do pilar ou da parede através da ligação de duas lajes ou vigas horizontais.

Acopladores soldados para composto estruturas

Sometimes, it is necessary to start reforço from the steel structure. In such cases, weldable couplers are the ideal solution. Made of low-carbon steel, they can be easily welded and allow connection to a threaded rebar.

Marco 81, Vietnã

Marco 81, Vietnã

Marco 81 é um projeto de torre alta localizada às margens do Rio Saigon, na Cidade de Ho Chi Minh. O projeto é de propriedade da empresa vietnamita Vingroup.

A construção da torre começou no final de 2014 e ela atinge uma altura de 470 metros até o tombamento, estabelecendo um novo recorde de altura no Vietnã. O Marco 81 é a 17ª torre mais alta do mundo.

Para este projeto, a Dextra está fornecendo seu renomado Bartec solução para o contratante Coteccons. A Bartec A solução foi aprovada pela ARUP, consultora representante do proprietário, e pela MACE International, consultora estrutural.

No total, 250.000 Bartec Os acopladores serão usados para conexões verticais de vergalhões na parede central e nas colunas, bem como para aplicações horizontais, como conexões entre a parede central e a viga e entre a parede central e a laje.

O uso de acopladores de vergalhões permite que a fôrma trepante avance sem obstáculos, além de permitir a conexão eficiente das barras iniciais da laje. Essas tecnologias, combinadas com o monitoramento de concreto de última geração, permitem ciclos de construção extremamente rápidos — de apenas 35 horas por andar.

Para aplicações compostas (colunas de aço para vigas), a Dextra também forneceu 20.000 acopladores soldáveis.


Exemplo de acoplador Bartec soldável em viga

O canteiro de obras de ritmo acelerado é apoiado por três conjuntos de Dextra Bartec Equipamento de preparação de barras, instalado diretamente no local. O equipamento é mantido pela Dextra e operado pelo distribuidor da Dextra no Vietnã, a Lotus Greentech.

Torre ONE Limassol, Chipre

Torre ONE Limassol, Chipre

UMA Torre Limassol é um edifício comercial e um novo marco em Limassol, Chipre. O projeto visa posicionar a ilha no mercado imobiliário internacional de luxo, aumentando sua atratividade para investimentos estrangeiros, oferecendo residências, comodidades e serviços de classe mundial. Isso também impulsionará a economia cipriota, aumentando as oportunidades de emprego local.

Com 170 metros de altura e um total de 33 andares, a ONE Limassol Tower é a projeto residencial à beira-mar mais alto da Europa. O edifício contará com 83 apartamentos luxuosos, incluindo uma cobertura de três andares.

Para reforçar este edifício histórico, a Dextra forneceu seus acopladores de vergalhões e conjuntos de máquinas de preparação de barras para a contratada J&P e ACC JV, uma joint venture entre Joannou & Paraskevaides Group (J&P) e Arabian Construction Company (ACC).

Mais do que 60,000 Bartec acopladores foram usados para emendas de vergalhões nas vigas e elementos estruturais verticais do edifício.

National Bank of Kuwait – New Headquarter, Kuwait

National Bank of Kuwait – New Headquarter, Kuwait

The new headquarters building of the National Bank of Kuwait is a 300m-tall tower with a total floor area of 127,000m². Its design, inspired by pearl shells, is located in the heart of Kuwait City’s financial district.

The main structure consists of composto concrete and steel, while the cladding on the fins and façades is predominantly glass-reinforced concrete.

Dextra contributed to reinforcing the building’s concrete structure by providing the following solutions:

  • 100,000 Bartec acopladores were installed for column reforço, construction articulações in the raft, and slab/beam-to-core wall connections.
  • 35,000 barras de cabeça acted as shear studs in the raft.
  • 1,500 Unitec acopladores aparafusados were used to extend existing reinforcing bars that were either unthreaded or too short for lapping. This convenient solution allows for rebar connections using a simple pneumatic wrench on-site, eliminating the need for rebar preparation.

Plum Condo Bangyai Station, Tailândia

Plum Condo Bangyai Station, Tailândia

Plum Condo Bangyai Station é um projeto de condomínio de 38 andares, composto por duas torres, localizado perto da estação de metrô elevada Bangyai, no noroeste de Bangkok. O edifício residencial abrigará 1.013 apartamentos.

A fase 1 do projeto (a primeira torre) começou em setembro de 2015 e a previsão é de que seja concluída por volta de março de 2018. A construção em ritmo acelerado é possível graças ao uso de totalmente pré-moldado técnicas concretas.

O proprietário do projeto, Pruksa, está operando sua própria planta de pré-moldados especificamente para este desenvolvimento.

Para este projeto, a Pruksa pretendia erguer rapidamente painéis pré-moldados (servindo como paredes de cisalhamento) para todos os níveis acima do solo. Para atender a esse requisito, a Dextra recomendou o uso de Groutec acopladores.

Os acopladores Groutec foram montados em Vergalhões de Ø25mm, que foi pré-encadeado usando o Bartec sistema. Os acopladores, instalados na base de cada elemento pré-moldado, foram então moldados como parte do painel de parede pré-moldado.

Após a elevação do elemento para o piso superior no local, a reconexão com a armadura saliente foi realizada por injeção argamassa anti-retraçãoÉ importante observar que a Dextra não fornece a argamassa; em vez disso, ela pode ser adquirida localmente, gerando economia significativa de custos. Após a injeção da argamassa, o reforço ao redor de cada painel pode ser removido após três dias.

Big Box Retail, UAE

Big Box Retail, UAE

Big Box Retail is a new four-story retail center designed to have the smallest possible carbon footprint, featuring an innovative optimization of the air-conditioning load.

Located in Jebel Ali, Dubai, UAE, the center spans 81,000 square meters and offers a leasable area for over 100 retail and concept stores.

Dextra's Groutec couplers, integrated into the precast panels, made on-site assembly quick and efficient. More than 1,100 units of Groutec L. in 25mm and 32mm sizes were supplied.

Groutec is a high-performance precast connection solution that is easy to set up and fast to install on-site using grout injection. It supports the connection of precast concrete columns, panels, and beams.

The first phase of the retail center is set for completion in 2019, while the second phase will introduce a residential area, creating a new lifestyle hub in Dubai.

Trinity Tower La Défense, França

Torre Trinity La Défense

A Trinity Tower, localizada no distrito comercial de La Défense, a oeste de Paris, é uma nova torre de escritórios de 33 andares e 140 metros de altura que contará com mais de 52.000 metros quadrados de espaço para escritórios.

The project aims to create both social and environmental impact by adding large outdoor public spaces that reconnect areas previously separated by roads. It will also feature green spaces, a rooftop area, and open facades, and it will achieve LEED certification.

For this project, Dextra supplied over 18,000 Fortec rebar connections through its French distributor, SNAAM Vernon.

Rebar couplers help accelerate construction by providing a fast and safe way to connect rebars—whether one bar at a time, in bundles, or as preassembled cages. Bundles and cages can be assembled off-site and simply reconnected using couplers upon arrival at their final location.

Para obter mais informações sobre a disponibilidade de soluções de emenda de vergalhões na França, entre em contato com nosso Escritório de Paris.

Act One | Act Two Tower, UAE

Act One | Act Two Tower, UAE

Ato Um | Torre do Ato Dois is a premium residential project in the Opera District of Downtown Dubai.

The development consists of two towers: Act One (52 stories) and Act Two (46 stories).

With their prime location, these residential towers offer stunning views of the Dubai Fountain and the Burj Khalifa. They are just a few minutes away from the Dubai Metro and major attractions such as the Dubai Mall and Souk Al Bahar.

For this exceptional residential project, Dextra was entrusted with reinforcing the buildings’ structures, including raft foundations, columns, slabs, and construction articulações.

A total of 150,000 Bartec rebar couplers, along with rebar preparation machines, were supplied to the construction site.

Bartec rebar couplers accelerate construction by providing a faster and more efficient way of connecting rebars compared to the traditional lapping method.

The thread on the rebar can be extended from a half-coupler to a full-coupler length, allowing the connection to be completed without rotating the bar.

Floresta Gardens Towers – The Pearl, Qatar

Floresta Gardens Towers – The Pearl, Qatar

The Floresta Gardens project involves the construction of towers within The Pearl Qatar.

The project includes the construction of mid-rise residential towers and villas within three gated villa communities, along with a 2,452-square-meter retail center. The precinct features a gross floor area of 267,471 square meters, 145,967 square meters of developable land, and 5,000 residential units.

In the precast construction of the towers, Dextra’s Groutec couplers played a significant role. Over 30,000 Groutec L. couplers, ranging in size from 20 mm to 40 mm, were embedded in columns for vertical connections on-site.

Groutec precast couplers provide an innovative solution for fast and easy connections of precast concrete elements. They are widely used in residential and commercial construction projects worldwide.

Torre de Jeddah, Arábia Saudita

Torre de Jeddah, Arábia Saudita

Torre de Jidá (previously known as Kingdom Tower) is a landmark skyscraper located along the Red Sea, in northern Jeddah, Saudi Arabia.

Designed to surpass the 1-km mark for the first time in history, the tower is expected to reach a total height of 1,008 meters, making it the tallest building in the world.

Jeddah Tower will feature a 200-room Four Seasons hotel, serviced apartments, office spaces, and an observatory. A total of 59 elevators will transport visitors between floors.

The tower’s structural engineering is led by Thornton Tomasetti, while construction is managed by Saudi Binladin Group, to which Dextra is supplying products through its local partner, Bahra Steel.

Dextra is proud to supply 100% of the rebar couplers used in both the foundations e superstructure of the tower.

Two main types of acopladores de vergalhões are used in the construction:

  • Standard Bartec acopladores are used for all foundations, columns, and vertical connections, allowing for the fast assembly of prefabricated cages.
  • Special bridging couplers are used for slab connections, enabling the secure connection of each U-shaped rebar leg to a column.