Being the new fast-tracks linking the Center to the East of Thailand, the construction of Bang Pa-In – Nakhon Ratchasima Motorway is therefore considered one of the country’s major infrastructure projects.

The main purpose of this project is to stimulate the country’s economy. When completed, it will connect Thailand’s major urban centers within the Greater Mekong Sub-region.
The Intercity Motorway includes two sections: the six-lane 103-kilometer section from Bang Pa-In to Pak Chong, and the 93-kilometer four-lane from Pak Chong to Nakhon Ratchasima. Having been started in 2016, the project is planned to last until 2020.

The project’s required completion period of 4 years being challenging, the construction of the motorway has been divided into approximately 40 contracts to accelerate the project’s schedule.
To minimize potential impacts to local residents, a number of underpasses, overpasses and elevated structures (e.g. large viaducts) are provided throughout the Bang Pa-In – Nakhon Ratchasima Motorway.

Optimize the infrastructure project with Dextra’s rebar couplers

For the construction of the motorway’s elevated structure, the contractors of different packages opted for Dextra’s full performance Bartec rebar couplers to save time and money on the mechanical connection of the diameter 20mm to 32mm reinforcement bars.
Thanks to Bartec’s unique splicing system, all applications (Standard/ Position) can be fulfilled by one and only model of rebar coupler, reducing inventory management of the project to a minimum.
Further to this, Dextra’s Sonitec sonic tubes were also installed for cross-hole sonic logging tests in the foundations of the Bang Pa-In – Nakhon Ratchasima Intercity Motorway structures.

Dextra’s post-tensioning bars for the Motorway’s elevated structures

In addition to Dextra’s splicing and cross hole logging solutions, both smooth and fully-threaded Post-Tensioning bars were also used for both temporary (lifting and launching girder assembly) and permanent applications in segments. Approximately 28,000 sets of both PT bars have been delivered as per June 2018.
For more information about Dextra’s solutions in Thailand, please contact our Bangkok office.

The construction of Binh Khanh Bridge is a part of Vietnam’s Ben Luc – Long Thanh Expressway project, which will run through Ho Chi Minh City and southern Long An province and involves the construction of 58-kilometer long roads.
Being started in 2016 and scheduled to be in service within 2020, the main purpose of this project is to develop the country’s transport facilities for fast vehicles.
To ease the construction of this 58-km long expressway, the project owner Vietnam Expressway Corporation has divided the project into three phases: the western, the middle, and the eastern sections.

Smooth and Fully-threaded PT bars: post-tensioning solutions for bridges and viaducts

For the construction of the 3-kilometer long Binh Khanh Bridge, which is part of the middle section, Dextra has supplied smooth and fully-threaded post-tensioning bars have been delivered. These have been used in the main structure, the stay cable, as well as the bridge’s western and eastern approaches.

For more information about our solutions in Vietnam, please contact our बैंकॉक कार्यालय.

The six-lane extradosed bridge over the Ganga River in Prayagaraj will span for 9.9 kilometers, with the main bridge covering 3.84 kilometers and the approach segment covering the remaining distance.

The 3.84-kilometer stretch would include 67 pillars and 17 pillar foundations. Also, of this 3.84 km, the span of 860 meters will be extradosed bridge, and the rest will be a precast segmental bridge with a span of 50 meters.

Dextra supplied 20,000 Sonitec tubes, an easy-to-assemble and time-saving tube solution used for the CSL (crosshole sonic logging) testing of foundation piles to determine the structural integrity. The tubes were installed in piles that were 30 to 36 meters deep and had a diameter of 1.2 meters.

The bridge will start from the Pratapgrah road, gain height to over cross the existing Y-junction (going towards Lucknow) and would then cross the Ganga from Kacchar area spanning over Beli village before ending at Stanley Road. It is expected to be in operational in 2024.

न्यू स्टॉरस्ट्रॉम ब्रिज परिवहन बुनियादी ढांचे में सुधार और देश के द्वीपों को अधिक कुशलता से जोड़ने की डेनमार्क की प्रतिबद्धता का एक प्रमाण है। स्टोर्स्ट्रोमेन जलडमरूमध्य पर फैला यह पुल पुराने स्टोर्स्ट्रॉम ब्रिज की जगह लेगा, जो 1937 से ज़ीलैंड और फाल्स्टर द्वीपों के बीच एक महत्वपूर्ण संपर्क के रूप में काम कर रहा है।

न्यू स्टॉरस्ट्रॉम ब्रिज को न केवल वाहनों के आवागमन बल्कि पैदल यात्रियों और साइकिल चालकों को भी समायोजित करने के लिए डिज़ाइन किया गया है। इसकी नवीन वास्तुकला और इंजीनियरिंग यात्रा के समय को कम करने, सुरक्षा में सुधार करने और इन दो प्रमुख डेनिश द्वीपों के बीच एक विश्वसनीय लिंक प्रदान करने के लिए तैयार हैं।

इंजीनियरिंग निर्माण समाधानों में अपनी विशेषज्ञता के साथ, डेक्सट्रा ने ढेर सुदृढीकरण पिंजरों को जोड़ने के लिए 120,000 रोलटेक कप्लर्स और हेड बार की आपूर्ति की है। ये घटक पुल की नींव के निर्माण के लिए आवश्यक हैं, जिससे यह सुनिश्चित होता है कि पुल अपने जीवनकाल के दौरान भारी वजन और ताकतों का सामना करने के लिए सुरक्षित रूप से एक दूसरे से जुड़ा हुआ है।

पुल की नींव में हमारे योगदान के अलावा, हमने मरम्मत अनुप्रयोगों के लिए यूनिटेक कप्लर्स की भी आपूर्ति की है, जो बिना किसी धागे के स्थापित सरिया को जोड़ते हैं। डेक्सट्रा के योगदान से, यह पुल आने वाली पीढ़ियों के लिए ज़ीलैंड और फाल्स्टर के बीच जीवन रेखा के रूप में काम करेगा, लोगों, समुदायों और अवसरों को जोड़ेगा।

The Nanay Bridge is a 2.2km bridge crossing the Nanay River, north of the city of Iquitos, Peru.

The bridge will connect the district of Bellavista on the right bank of the Nanay River with the district of Santo Tomas on the left bank.

With a population of almost half a million people, Iquitos is the largest city in the world that cannot be reached by road – tucked in the Peruvian Amazonia jungle, it is currently accessible only by river and air.

Thanks to this project, the city will finally be connected with the rest of the Loreto Region.

The main structure is a cable-stayed bridge with a main span of 242m and total length of 424m. The approach structures are 1.2km long on the right bank of the river, and 320m long on the left bank of the river.

The bridge carries two lanes of traffic and two pedestrian walkways. The roadway has a total width of 12m, and each pedestrian walkway is 1.2m wide.

It uses light-weight composite steel concrete to minimize the use of concrete and to reduce loads transferred to the foundations.

For this project Dextra has supplied 100,000 Bartec couplers for rebar connection and 30,000 headed bars for shear reinforcement of the anchors.

Once completed, it will be the longest bridge in the Country.