The Car Servicing Building located at 2 Kung Chong Road in Singapore is a mixed-use 7-storey car park basement, car servicing facility and office building. The building will be occupied by the Automobile Association of Singapore.

This project, built by Zhengda Corporporation Pte Ltd, is taking advantage of precast technology to achieve faster construction cycles. The production of the precast elements was performed by the Malaysian precaster Eastern Pretech.

For this project, Dextra delivered to Malaysia about 6,000 Groutec couplers, which have been embedded into shear walls and column elements.

The elements were then brought to site and reconnected to protruding reinforcement by injecting non-shrink grouting mortar. Bracing around the precast element is usually removed in the 3 days following the grout injection, significantly reducing the assembly time.

For more information about the availability of precast solutions in Singapore, please contact Dextra team in Malaysia.

Nathani Heights is a 72-storeys skycrapper in Mumbai. With a total height of 262 meters it is among the 30 tallest building in the city. The construction of the building started in 2012 and will be completed in 2018.

For this project, Dextra supplied its famous Bartec rebar coupler solution. Bartec is the main rebar coupler solutions in India, satisfying all technical requirements even in seismic areas.

As in other highrise building, rebar couplers have been used for large diameter rebar connection in vertical applications such as columns and corewalls (bar to bar vertical connection).

Rebar couplers were also used for slab connections. In that case, the coupler is pre-positionner flush with formwork (allowing climbing formwork to go up). After casting, a threaded rebar is simply screwed inside the coupler to create the starter bar.

Louvre Abu Dhabi es un innovador museo de arte y civilización ubicado al norte de la ciudad de Abu Dhabi, capital de los Emiratos Árabes Unidos. Es el museo más grande de la península arábiga, con una superficie total de 24.000 metros cuadrados. El Museo del Louvre Abu Dhabi abrió sus puertas el 11 de noviembre de 2017.

Para este proyecto, Dextra ha participado en las obras de hormigón entre 2013 y 2014, suministrando bartec Solución de acoplador de barras de refuerzo para Arabtec para todas las conexiones de barras de refuerzo en balsas y columnas. También se utilizaron acopladores para crear aberturas temporales en la estructura de refuerzo para permitir el paso de hombres y equipos. Un total de 110.000 bartec Se suministraron acopladores de barras de refuerzo para este proyecto.

El bartec La solución es una solución aprobada por el DCL (Dubai Central Laboratory), lo que hace posible su uso en los EAU. Todos los servicios de roscado para preparar las barras de refuerzo utilizadas en el Louvre Abu Dhabi fueron realizados por la red de distribuidores de Dextra.

Para obtener más información sobre la disponibilidad de soluciones de empalme de barras de refuerzo en Medio Oriente, comuníquese con nuestro Oficina de Dubái para más información.

Business Garden Bucharest es un moderno complejo de oficinas de clase A de uso mixto. Cuenta con espacios comerciales, combinados con servicios comerciales y públicos en la planta baja. El nombre Business Garden proviene de su amplia zona verde integrada, un jardín que conecta los edificios con espacios de recreación designados. Se proporciona una amplia zona de césped, senderos peatonales y bancos con Wi-Fi gratuito para invitar a los asistentes a la oficina a trabajar o tomar un descanso refrescante al aire libre. El complejo cuenta con la precertificación LEED Platino. Para satisfacer las necesidades cotidianas de los inquilinos de sus empleados, las oficinas de Business Garden Bucharest están diseñadas para tener una distribución eficiente, construidas con acabados de alta calidad y soluciones sostenibles que están en línea con las certificaciones ecológicas LEED Platinum.

Para este proyecto, Dextra participó en el suministro de su solución de acoplador de barras de refuerzo Fortec. La solución Fortec se compone de un acoplador de barras de refuerzo estándar que se puede utilizar como empalme estándar y de posición para conectar dos extremos de barras de refuerzo que han sido previamente agrandados y roscados. Fortec es especialmente adecuado para la construcción en entornos sísmicos, como es el caso de los edificios en la zona de Bucarest.

Se han utilizado acopladores Fortec para proporcionar conexiones verticales de superestructura. Los acopladores Fortec son relativamente compactos y pueden ayudar a reducir la congestión creada por el traslape de las barras de refuerzo. Los acopladores Fortec también proporcionaron una apertura temporal, lo que permitió el movimiento de los trabajadores y el equipo alrededor del refuerzo. Antes de fundir, las barras de continuación simplemente se conectan a los acopladores, llenando el espacio de apertura temporal.

London Wall Place is large a double tower office development in London built close to the Roman City Wall historical monument.

For this project, Dextra offered contractor Byrne Bros and main consultant WSP a technical solution for the fast installation of precast wall panels.

The concept was to install Groutec couplers in each panel reinforcement, at the bottom of the vertical bars previously prepared with Rolltec thread system, available in the UK through our distributor network.

After bracing the precast panel in its final position, non-shrink grout is injected into the cavity of the coupler, in order to create the rebar connection. Groutec is not reliant on a specific type of grout. Rather, several different brands of grout can be used, facilitating local scouring and helping to keep costs low. The bracing around the panel is then removed after the grout has achieve a prescribed strength.

After straightening and bracing of the precast panel, non-shrink grout is inserted into the cavity by injection. Dextra does not supply grout as Groutec is by design compatible with several brands that can be sourced locally, generating savings and easing project management.After injection, the bracing around the precast panel may then be removed after only 3 days.

The use of Groutec for precast panel is a time-saving and economical way to quickly take advantage of the precast technology. For similar application video, please check The Plum Central Station project page.

Icon Siam complex, located on the right bank of the Chao Phraya river in the West of Bangkok, is a new multipurpose commercial/residential complex consisting of two highrise buildings and a shopping mall. This new massive project aims to give back its glamour to the banks of the Chao Praya river.

The two towers are expected to reach 280m (SuperLux Tower) and 315m (Magnolia Tower) respectively. The Magnolia Tower will thus be slightly taller than the MahaNakhon Tower, Bangkok’s tallest building since 2015.

Dextra is supplying Thai-Obayashi (contractor of the shopping mall structure) and Italian-Thai (contractor of both towers) with its Bartec rebar splicing solution.

Dextra engineers performed operator trainings and do preventive maintenance directly on site to guarantee maximum output in thread production.

In total, more than 800,000 bartec rebar couplers and 20,000 Bartec Barras con cabeza are being used in foundations and superstructure in the following applications:

L-shaped dowel bars (wall-slab connections)

This is a typical application used in foundation D-Walls to avoid protruding rebar. it is also used in the superstructure to allow the sliding formwork to climb up without any disturbance

Substitution of hooked bars with end anchors

When the wall reinforcement is especially congested, the use of Headed Bars (also called end anchors) allows to anchor the reinforcement in the wall without the need to produce hooks.

Double-ended connection in shear-walls

This solution allows to create a continuity inside the column or wall by bridging two horizontal slabs or beams.

Welded couplers for composite structures

Sometimes it is necessary to start reinforcement from the steel structure. In that case, weldable couplers are the ideal solution: Made of a low-carbon steel, they can be welded easily and allow connection to a threaded rebar.