Dextra-Gruppe | Zuverlässige Verbindungen

DEXTRA
Linkedin Facebook Youtube
DEXTRA
Linkedin Facebook Youtube
Mein Dextra

Schlagwort: groutec S

Uniqlo & Hive Warehouse, Indonesia

Gepostet auf von Kansuda Visesthanakorn
 

Uniqlo & Hive Warehouse, Indonesia

 

Indonesia’s building construction sector has driven the demand for rapid and efficient construction methods to accommodate its growing population. Precast construction has emerged as a key solution to these challenges, helping to reduce on-site labor, accelerate project timelines, and ensure consistent quality.

A seamless connection between structural elements is essential for the success of precast construction. Dextra supplied Groutec precast couplers for projects worldwide, including in Indonesia. Groutec couplers (20mm) were used in the Uniqlo & Hive Indonesia warehouse building project for joining precast columns, enabling rapid and reliable assembly while ensuring structural integrity.

The use of these couplers has minimized on-site labor requirements and expedited project milestones, leading to cost savings and timely project completion. This allows the building to become operational sooner. Additionally, the high-strength steel composition of the couplers, along with stringent quality control measures, ensures robust connections capable of withstanding dynamic structural loads.

 

Plum Condo Bangyai Station, Thailand

Gepostet auf von Sir Gwi

Plum Condo Bangyai Station, Thailand

Plum Condo Bangyai Station is a 38-story condominium project consisting of two towers, located near Bangyai elevated metro station in the northwest of Bangkok. The residential building will house 1,013 apartments.

Phase 1 of the project (the first tower) began in September 2015 and is expected to be completed around March 2018. The fast-paced construction is made possible by the use of fully precast concrete techniques.

The project owner, Pruksa, is operating its own precast plant specifically for this development.

For this project, Pruksa aimed to quickly erect precast panels (serving as shear walls) for all levels above ground. To meet this requirement, Dextra recommended the use of Groutec Koppler.

Groutec couplers were mounted on Ø25mm rebars, which had been pre-threaded using the Bartec system. The couplers, installed at the bottom of each precast element, were then cast as part of the precast wall panel.

After lifting the element to the upper floor on-site, reconnection to the protruding reinforcement was achieved by injecting non-shrink mortar. It is important to note that Dextra does not supply the mortar; instead, it can be sourced locally, generating significant cost savings. Once the grout is injected, bracing around each panel can be removed after three days.

Erweiterung der Jamnagar-Raffinerie

Gepostet auf von Sir Gwi

Jamnagar Refinery Expansion: The World’s Largest Refinery by Production Capacity

Located in Gujarat, western India, the Jamnagar Refinery is the largest refinery in the world by production capacity. Owned by Reliance Industries, it was commissioned in 1998 and spans a vast 50 km² area.

For Phase 3 alone, more than 305,000 tons of steel Bewehrung were used in a 36-month project, involving over 100,000 engineers and construction workers.
Dextra has been involved in Jamnagar since the early phases, supplying rebar splicing solutions for Phases 1, 2, and 3 of the project.

Dextra’s Rebar Splicing Solutions for Phase 3:

Three rebar coupler solutions were used in Phase 3:

  • Bartec Solution
    Used for cast-in-situ applications, including bar-to-bar connections in foundations, pile cages, and column cages.
    Also utilized in heavily congested rafts and pile caps to facilitate efficient Schraubanschlüsse.
  • Groutec Couplers
    Applied to pipe racks, which were constructed from Fertigteil elements in a dedicated Fertigteil factory within the project.
    Positioned in the bottom elements and filled with grout, eliminating the need for in-situ wet fugen and ensuring fast, secure connections between beams and columns.
  • Unitec Couplers
    Used in applications where rebar length was too short to allow traditional overlap connections.

image06

Waldstadt Johor 森林城市

Gepostet auf von Sir Gwi

Waldstadt Johor 森林城市

Forest City ist eine riesige Stadtentwicklung mit gemischter Nutzung, die an der Südspitze Malaysias, in der Region Iskandar, Johor, stattfindet. Die Entwicklung findet auf neu gewonnenem Land direkt gegenüber der Johor-Straße in Sichtweite von Singapur statt.

Das Projekt, das im nächsten Jahrzehnt fortgesetzt wird, zielt letztendlich darauf ab, 300.000 Wohneinheiten für bis zu 700.000 Menschen sowie zahlreiche Gewerbegebäude zu schaffen.

The Forest City project is expected to fuel the region’s economy, as well as Singapore, as light rail and road links will ultimately make the connection across the island state.

Die Anfänge has been involved since the early phases of the project for the supply of its Groutec S precast solution. Groutec allow the swift connection of precast columns and panels, without the need of in situ joints, speeding up the construction project. For the Forest City Project, Groutec S Für die Verbindung der Paneele wurden Kupplungen (kompakte Modelle) verwendet, wodurch die Scherwände der Wohntürme entstehen.

The Forest City project is supported by the installation at site of several sets of Bartec threading equipment, which prepare the bars with threads in order to perform the connection with the top part of the Groutec S sleeve. The Dextra aftersales team also provided training and support in order to guarantee high production output during the project duration.

For more information about Die Anfänge solutions in Asia, please contact our Büro in Bangkok

Emirates’ Bustanica Vertical Farm, UAE

Gepostet auf von Sir Gwi

Emirates’ Bustanica Vertical Farm, UAE

Emirates’ Bustanica Vertical Farm is the world’s largest vertical farm, a sprawling indoor farming facility spanning an impressive 330,000 square feet. This state-of-the-art facility plays a crucial role in providing fresh, locally sourced in-flight food for Emirates and several other airlines operating at Dubai International Airport. At the core of this groundbreaking project lies meticulous engineering, and one crucial component that contributes to its success is the use of Dextra Groutec couplers for the precast shear wall module connections.

Diese vertikale Farm nutzt modernste Technologie, um eine Vielzahl von Nutzpflanzen in einer kontrollierten Umgebung anzubauen. Durch die vertikale Stapelung von Pflanzenschichten maximiert die Anlage die Raumausnutzung und minimiert gleichzeitig den Ressourcenverbrauch. Das Ergebnis ist ein nachhaltiges und effizientes System, das unabhängig von den äußeren klimatischen Bedingungen das ganze Jahr über frische, qualitativ hochwertige Produkte produziert.

Die Rolle der Dextra-Groutec-Kupplungen

In any construction project, the choice of materials and components is critical to ensuring structural integrity and long-term durability. In the case of the world’s largest vertical farm, the engineers faced the challenge of connecting precast shear wall modules securely. The solution came in the form of Groutec L couplers with a diameter of 25mm.

Groutec couplers are renowned for their reliability and strength in connecting precast concrete elements. These couplers provide a robust and efficient means of joining precast concrete components, ensuring the structural stability of the entire facility. The 25mm diameter was carefully selected to meet the specific requirements of the shear wall modules, offering a seamless connection that enhances the overall resilience of the vertical farm.

Die Groutec-Kupplungen erleichtern nicht nur die strukturelle Integrität der vertikalen Farm, sondern stehen auch im Einklang mit dem Engagement des Projekts für Nachhaltigkeit. Die Haltbarkeit und Zuverlässigkeit dieser Kupplungen stellen sicher, dass die Verbindungen dem Test der Zeit standhalten, was die Langlebigkeit der Anlage und ihren Beitrag zu einer nachhaltigen Landwirtschaft unterstützt.