مجموعة دكسترا | اتصالات موثوقة

Plum Condo Bangyai Station, Thailand

Plum Condo Bangyai Station, Thailand

Plum Condo Bangyai Station is a 38-story condominium project consisting of two towers, located near Bangyai elevated metro station in the northwest of Bangkok. The residential building will house 1,013 apartments.

Phase 1 of the project (the first tower) began in September 2015 and is expected to be completed around March 2018. The fast-paced construction is made possible by the use of fully precast concrete techniques.

The project owner, Pruksa, is operating its own precast plant specifically for this development.

For this project, Pruksa aimed to quickly erect precast panels (serving as shear walls) for all levels above ground. To meet this requirement, Dextra recommended the use of جروتيك couplers.

Groutec couplers were mounted on Ø25mm rebars, which had been pre-threaded using the بارتيك system. The couplers, installed at the bottom of each precast element, were then cast as part of the precast wall panel.

After lifting the element to the upper floor on-site, reconnection to the protruding reinforcement was achieved by injecting non-shrink mortar. It is important to note that Dextra does not supply the mortar; instead, it can be sourced locally, generating significant cost savings. Once the grout is injected, bracing around each panel can be removed after three days.

الحلول ذات الصلة

خبرة

في كل لحظة من رحلة عميلك، تكرس فرق Dextra نفسها لإنتاج حلول البناء الذكية التي تتيح لعملائنا الوصول إلى مستويات أعلى من الإنتاجية والسلامة في مواقع البناء الخاصة بهم.

تمتلك Dextra مخزونًا فعليًا في عدة قارات، يكمله في كل بلد المخزون المحلي لموزعينا. ومن خلال هذه الشبكة الموسعة، تتأكد Dextra من أن منتجاتنا في متناول اليد دائمًا بغض النظر عن مكان تواجد شركائنا.

بالنسبة للحلول التي تتطلب التخصيص، يمكن لـ Dextra أيضًا تجاوز أوقات التسليم القياسية الخاصة بنا وتقديم خطط تسليم سريعة. استشرنا لمزيد من المعلومات.

من خلال 3 مواقع صناعية رئيسية تقع في بانكوك (تايلاند)، وقوانغتشو (الصين)، وبيون (الهند)، تمتلك Dextra مرافق التصنيع والعمليات الخاصة بها بالكامل. وهذا يسمح لنا بالتحكم الكامل في توقيت عملياتنا وجودة الحلول المنتجة.

يقع مختبر اختبار المواد المعتمد بشكل مستقل، والمعتمد وفقًا لمعايير ISO-IEC17025، في مصنع Dextra الرئيسي في بانكوك، مما يسمح باختبار المواد والمنتجات.

تهدف Dextra إلى توفير المنتجات التي تتجاوز الموافقات الفنية الدولية الأكثر تطلبًا، وهدفنا هو خلق أقصى قدر من رضا العملاء من خلال الامتثال لاحتياجات عملائنا والمتطلبات المحددة.