مجموعة دكسترا | اتصالات موثوقة

SOCAR Tower, Azerbaijan

SOCAR Tower, Azerbaijan

برج سوكار is an office tower located on the way to the city center of Baku, the capital of Azerbaijan. It is the tallest building in Azerbaijan and the entire Caucasus region. The building serves as the headquarters of the State Oil Company of Azerbaijan Republic (SOCAR).

The tower features 42 floors and reaches a height of 202 meters. Completed in 2016, it is now one of the most recognizable landmarks in Baku.

For this project, Dextra was involved in the concrete works between 2011 and 2014, supplying the بارتيك rebar coupler solution for all rebar connections. The project was supported by بارتيك bar-end preparation equipment sets, installed directly on-site and maintained by Dextra’s European after-sales team.

Dextra rebar couplers were supplied to contractor Tekfen for:

  • Vertical bar-to-bar connections in columns.
  • Horizontal rebar connections in slabs.
  • Wall-to-beam connections, where the coupler was cast flush with the formwork in the first phase of concreting. After formwork removal, the connecting rebar was simply screwed into the Bartec coupler.

To enable splicing at locations where rebar had not been prepared with a thread, RepairGrip sleeves and hydraulic equipment were also supplied for precise applications. RepairGrip allows for the convenient splicing of rebar where the protruding length is insufficient for a safe overlap.

For more information about the availability of precast solutions in the Middle East, please contact our مكتب دبي.

الحلول ذات الصلة

خبرة

في كل لحظة من رحلة عميلك، تكرس فرق Dextra نفسها لإنتاج حلول البناء الذكية التي تتيح لعملائنا الوصول إلى مستويات أعلى من الإنتاجية والسلامة في مواقع البناء الخاصة بهم.

تمتلك Dextra مخزونًا فعليًا في عدة قارات، يكمله في كل بلد المخزون المحلي لموزعينا. ومن خلال هذه الشبكة الموسعة، تتأكد Dextra من أن منتجاتنا في متناول اليد دائمًا بغض النظر عن مكان تواجد شركائنا.

بالنسبة للحلول التي تتطلب التخصيص، يمكن لـ Dextra أيضًا تجاوز أوقات التسليم القياسية الخاصة بنا وتقديم خطط تسليم سريعة. استشرنا لمزيد من المعلومات.

من خلال 3 مواقع صناعية رئيسية تقع في بانكوك (تايلاند)، وقوانغتشو (الصين)، وبيون (الهند)، تمتلك Dextra مرافق التصنيع والعمليات الخاصة بها بالكامل. وهذا يسمح لنا بالتحكم الكامل في توقيت عملياتنا وجودة الحلول المنتجة.

يقع مختبر اختبار المواد المعتمد بشكل مستقل، والمعتمد وفقًا لمعايير ISO-IEC17025، في مصنع Dextra الرئيسي في بانكوك، مما يسمح باختبار المواد والمنتجات.

تهدف Dextra إلى توفير المنتجات التي تتجاوز الموافقات الفنية الدولية الأكثر تطلبًا، وهدفنا هو خلق أقصى قدر من رضا العملاء من خلال الامتثال لاحتياجات عملائنا والمتطلبات المحددة.